FratFiles

• Save Paper

OKLAHOMA STATE UNIVERSITY


LABORATORY


SAFETY


MANUAL


Prepared by:
OSU Environmental Health & Safety
120 Physical Plant
Stillwater, OK 74078-0113
405-744-7241


December, 1999



This document describes the Chemical Hygiene Plan for

(department or laboratory name, building, room number(s) )

at Oklahoma State University, as required by Title 29 Code of Federal Regulations Part 1910, Subpart Z,
Section .1450 (29 CFR 1910.1450), "Occupational Exposures in Laboratories" referred to as the "Laboratory
Standard".

In order to comply with the Laboratory Standard, Oklahoma State University has established a chemical
hygiene plan to ensure that employees are protected from health hazards associated with hazardous
materials in the laboratory and to ensure that exposures are kept below the permissible exposure limits
specified in 29 CFR part 1910, subpart Z. Questions regarding this plan should be directed to:

(name, title, campus......

View the rest of this paper...

Approximate Word Count: 67931
Approximate Pages: 272 (250 words per double-spaced page)

Similar Essays

1. Laboratory Safety Manual
   

   Laboratory Safety Manual OKLAHOMA STATE UNIVERSITY LABORATORY SAFETY MANUAL Prepared by: OSU Environmental Health & Safety 120 Physical Plant Stillwater, OK 74078-0113

2. Recognizing Laboratory Safety
   

   Recognizing Laboratory Safety Recognizing Laboratory Safety Purpose: The purpose of this lab is to stay safe no matter what you're doing in lab. You may be working with dangerous

3. Proceedures For Freezing Human Cells In Research
   

   ph: 313-725-4614) 4. Definitions/Abbreviations- N/A 5. Warning and Precautions- 5.1. Safety 5.1.1. Treat all specimens and waste as infectious. Use all safety precautions for

4. Law And Ethics In Medicine
   

   maybe denied providing the information can endanger the patient's health and safety or the health and safety of others. In such situations, the patient has the right to

5. Proposal Of Dangerous Goods
   

   Safety Requirement 1 (22) ASTM Corrosion Test ASTM G 31-72, "Standard Practice for Laboratory Immersion Corrosion Testing of Metals", May 30, 1972, as reapproved in 1995,