FratFiles

• Save Paper

The Oscilloscope
Objectives:
1.To become familiar with the construction and use of the oscilloscope.
2.To gain experience in making simple measurements using this equipment.
Materials and Equipment Needed:
Dual Trace Oscilloscope with probes
Instructions:
Please read this experiment carefully so when you come to the lab you understand some of the basic ideas of an oscilloscope. Become familiar with the documentation for this experiment and the location of the various buttons and knobs on the oscilloscope.
Throughout this lab there are capitalized words and abbreviations which refer to the controls (knobs, buttons, dials, ect.) on the instrument.
Upon completion of this lab the student will be able to:
1. Use an oscilloscope and manipulate the controls to display various signals.
2. Measure the frequency, period, and amplitude of a signal with the aid of an
oscilloscope.
Introduction:
The oscilloscope is one of the most useful tools in electronics. Unlike......

View the rest of this paper...

Approximate Word Count: 3004
Approximate Pages: 13 (250 words per double-spaced page)

Similar Essays

1. The Oscilloscope
   

   The Oscilloscope The Oscilloscope Objectives: 1.To become familiar with the construction and use of the oscilloscope. 2.To gain experience in making simple measurements using this

2. Use Of Oscilloscope For Engineers
   

   Use Of Oscilloscope For Engineers COMSATS Institute of Information Technology, Chak Shahzad Campus, Islamabad Department of Electrical Engineering | | |Subject: |Electronics-1

3. Senior Project Proposal
   

   and function generator, LCD, and keypad, interfaced with a PC using custom built oscilloscope software and a Graphical User Interface (GUI). Our project will employ a high level

4. Ac Circuits Lab Report
   

   AC voltage and to measure phase displacement. Equipment list: 1. 600mH Inductor 2. Oscilloscope with x1 Probe 3. 120/25V Multi-tap Transformer 4. Digital Multimeter 5. Identical

5. Ordinary Men
   

   requires us to design and build a circuit that generates specified functions on the oscilloscope, as given on the project description. Also, we were required to design a means of