Tacoma Narrows Bridge
Tacoma Narrows Bridge
A lot of things can go wrong when building or designing a major building, plane, bridge, or even a road. Engineers face the challenges to overcome these flaws or problems everyday when they are trying to design structures. The primary causes of engineering disasters are usually: Human factors, design flaws, material failures, extreme conditions or environments, and combinations of these reasons put together. There are many things an engineer has to look for when designing a major structure such as the Tacoma Narrows Bridge.
On July 1, 1940 the Tacoma Narrows Bridge was open to traffic and was the third longest suspension bridge in the united state during the 1940's. It had a span of 5939 feet measuring the approaches. It had two towers of 425 feet tall that were connected to the bridge. During the design they picked that it should be a suspension bridge because it was only supporting cars which were much lighter then trains. Due to only have cars on the......
View the rest of this paper...
Approximate Word Count: 458
Approximate Pages: 2 (250 words per double-spaced page)
Why should you join Frat Files?
- - It's safe, secure, and private.
- - Instant access to over 100,000 papers. New papers are added hourly.
- - Fast and reliable customer support.
Similar Essays
-
Tacoma Narrows Bridge
tacoma narrows bridge. Tacoma Narrows Bridge A lot of things can go wrong when building
or designing a major building, plane, bridge, or even a road. ... -
Suspension Bridge
... The most famous example of an aerodynamically unstable bridge is the Tacoma
Narrows Bridge in Washington state, USA. This page on ... -
Jgads
... Eldridge came up with a plan to span the Tacoma Narrows with a 5000 foot two-lane
suspension bridge, which when completed would be the third longest suspension ... -
Petrosky
... include the Hyatt Regency's Sky Walk disaster of 1981, which killed 114 people and
injured over 200 others, and the Tacoma Narrows Bridge, which fortunately ...
Frat Files
Members
Information
